Products  |  Theory of Machines and Properties of Materials  |  Statics  |  WP 961
WP 961 Shearing Force Apparatus Show data sheet (pdf file)
Technical Description
This demonstration unit facilitates the experimental investigation of the progression of the shearing force in a bar subject to point loads. Also the section principle commonly used in mechanics can be demonstrated. Due to the usage at 1/3 span of a low friction joint sensitive to shearing forces and a dynamometer, the measurements of shearing force on the bar can be recorded directly. The deflection of the bar as a result of the travel of the dynamometers and the horizontal alignment can be compensated and regulated using two adjustment bolts. The bar is loaded with graduated sets of weights that can be attached at any point on the bar. The support rollers are equipped with ball bearings.
Learning Objectives / Experiments
· Progression of the shearing force on a bar on the application of point forces
· Demonstration of the section principle
Features
· Direct measurement of the shearing force on the bar by means of special joint with dynamometer
Alternative products
SE 110.10 -- Experimental Set Shear Forces (Influence Lines)
SE 110.15 -- Experimental Set Bending Moment and Shear Force
WP 960 -- Shearing Force and Bending Moment Apparatus
Specification
[1] Table unit for the demonstration of the section principle and shearing force on a bending bar
[2] Bar length 1000mm, span 800mm
[3] Shearing force measuring range 0...50N
[4] Direct measurement of the shearing force on the bending bar by means of special joint
[5] Max. load 20N
[6] l x w x h 1400x320x600mm
Technical Data
Total length of bar: 1000mm
Span: 800mm
Shearing force measuring range: 0...50N
Max. load: 20N
Dimensions and Weight
l x w x h : 1400 x 320 x 600 mm
Weight : 35 kg
Scope of Delivery
1 apparatus complete,
1 set of experiment instructions
Order Details
020.96100 WP 961 Shearing Force Apparatus
© 2005 G.U.N.T. Gerätebau GmbH