Products  |  Theory of Machines and Properties of Materials  |  Statics  |  FL 112
FL 112 Toggle Joint Apparatus Show data sheet (pdf file)
Technical Description
Using this table apparatus, the reaction forces as a function of the lever angle can be demonstrated based on the example of a loaded toggle joint. To determine the forces, straightforward force resolution is used. The apparatus is of robust, solid metal construction. Using the adjustment device, the angle can be continuously adjusted between 30°...170°, the angle can be read on a scale on the base plate. The horizontal force in the bearing is determined using a spring balance. A set of weights permits the load to be varied in steps. The apparatus is set up between two tables or blocks to perform the experiment.
Learning Objectives / Experiments
· Force resolution on a toggle joint
· Distribution of forces and reaction forces on a loaded toggle joint
Features
Demonstration of the distribution of forces on a toggle joint
Lever angle continuously adjustable between 30°...170°
Alternative products
EM 040 -- Work done by a Variable Force, Vertical Effort
EM 046 -- Funicular Polygon & Forces Apparatus
SE 110.51 -- Experimental Set Equilibrium of Forces
TM 110 -- Apparatus for Statics Experiments
Specification
[1] Apparatus on the distribution of forces on a loaded toggle joint
[2] Angle continuously adjustable between 30°...170°, solid metal construction
[3] Force measurement with mech. spring balance, measuring range 0...50N, grad. 0.5N
[4] Load weight up to 20N
Technical Data
Opening angle: 30...170°
Load measuring range: 0...50N,
Graduations: 0.5N
Set of weights: up to 20N
Dimensions and Weight
l x w x h : 660 x 140 x 550 mm
Weight : approx. 8 kg
Scope of Delivery
1 toggle joint support, 1 spring balance, 1 set of weights, 1 instruction manual
Order Details
021.11200 FL 112 Toggle Joint Apparatus
© 2005 G.U.N.T. Gerätebau GmbH