Products  |  Theory of Machines and Properties of Materials  |  Theory of Machines  |  GL 200
GL 200 Demonstrator for Lathe Gearing Layout Show data sheet (pdf file)
Technical Description
This clearly laid out gear model has all the key features and properties of a workshop lathe. As the functional elements are open to view, all the functions of the gears can be clearly observed. On this model, the motor drive is replaced by a hand wheel with a disc and scale. The action of the gears is thus slow and completely hazard-free. A removable plotter drum simulates the work piece, a plotter pen replaces the cutting tool. All experiments are easy to repeat and offer a wider range of variations.
Learning Objectives / Experiments
· Investigation of all the key gear functions on a lathe
- Primary gear unit, change gear unit
- Tumbler gear unit
- Feed gear unit (tumbler lever)
Features
Hazard-free and clear demonstration of function of the gears on a lathe
Alternative products
GL 410 -- Gear Assembly Unit: Simple Drives
GL 420 -- Gear Assembly Unit: Combined Drives
GL 430 -- Gear Assembly Unit: Step and Shift Gears
Specification
[1] Fully functional table demonstration unit of a conventional lathe gear unit
[2] Primary gear unit, change gear unit, tumbler gear unit and quick change gear unit
[3] Recording of the feed on paper using a plotter drum on the primary spindle
[4] Operation via hand crank
[5] Optimal demonstration due to open construction
Technical Data
Primary spindle speed steps: 9
Feed gear steps: 7
Dimensions and Weight
l x w x h : 750 x 500 x 800 mm
Weight : approx. 42 kg
Scope of Delivery
1 lathe gear model, 1 instruction manual
Order Details
030.20000 GL 200 Demonstrator for Lathe Gearing Layout
© 2005 G.U.N.T. Gerätebau GmbH