G.U.N.T. - Equipment for engineering education

Products | Theory of Machines and Properties of Materials | Theory of Machines | TM 260

TM 260

Tribology Trainer Basic Module

Technical Description

The trainer enables different sliding and rolling friction cases to be investigated. The parameters of a tribological system can be assessed during this process. The drive module is the basis for experiments with a range of accessories. The unit consists of a sturdy frame made of anodised aluminium section. Rubber feet ensure that the table unit does not slip. The individual accessory modules are driven using a DC drive motor. The motor is connected to the controller. The rotational speed can be continuously and finely adjusted using a 10-turn potentiometer. The speed is regulated electronically and displayed digitally. Friction forces are measured using strain gauge transducers. The controller processes this data and displays it digitally. Snap-action fasteners for fixing the accessory modules to the frame simplify the rapid assembly and disassembly of the experiments.

Learning Objectives / Experiments

The following experiments can be performed with the basic module when fitted with the appropriate accessory:
· Combined rolling and sliding friction of two discs with slip
· Elastohydrodynamic behaviour, EHD, rolling friction of a spherical object against a flat surface
· Abrasion testing: pin against a disc
· Abrasion testing: abrasive disc experiment
· Friction vibration and "stick-slip" effects
· Distribution of pressure in plain bearings

Features

Drive module for investigating various sliding and rolling friction cases
Electronic measurement of the contact pressure between the friction materials using strain gauges
Modular overall concept

Available accessories

TM 260.01 -- Experimental Module Rolling / Sliding Disc
TM 260.02 -- Experimental Module Optical Elastohydrodynamics
TM 260.03 -- Experimental Module Pin on Disc
TM 260.04 -- Experimental Module Slip / Stick & Friction Vibration
TM 260.05 -- Experimental Module Block on Ring Friction
TM 260.06 -- Experimental Module Journal Bearing Pressure Distribution

Specification

[1] Basic module for experiments on tribological systems
[2] Base frame made of anodised aluminium profile
[3] Modular layout as table unit
[4] Rapid assembly due to special fasteners
[5] Swivelling drive consisting of DC motor and worm drive 15:1
[6] Operating speed: 0...200rpm, continuous, electronically controlled, 8-digit speed display
[7] Force measurement using strain gauges, 0...50N, 3½-digit digital display
[8] Incremental encoder: number of pulses 6/360°
[9] Control housing L x w x h 370x270x190mm
[10] l x w x h 500x450x200mm

Technical Data

DC motor: 24V
Nominal speed: 3000rpm
Torque: 18.5Nm
Worm drive: ratio 15:1
Operating speed: 0 ... 200rpm, electronically controlled
Speed display, 8-digit
Incremental encoder: number of pulses 6/360°
Force measurement using strain gauges, 0...50N, display 3½-digit, digital

Dimensions and Weight

l x w x h : 500 x 450 x 200 mm
Weight : approx. 16 kg
Control housing l x w x h : 370 x 270 x 190 mm

Connections

230V , ~50Hz

Scope of Delivery

1 base frame, 1 motor with gearbox,
1 controller, 1 instruction manual

Order Details

040.26000 TM 260 Tribology Trainer Basic Module