Products  |  Theory of Machines and Properties of Materials  |  Theory of Machines  |  TM 310
TM 310 Thread Efficiency Testing Equipment Show data sheet (pdf file)
Technical Description
This table unit is based on the vertical combination of a threaded spindle and a nut. It contains two spindles with trapezoid threads and varying lead. To match these spindles, three long nuts made of different materials with single lead, and a gunmetal nut with a double lead are provided. A spring balance with a nylon cord enables torque to exercised on the spindle using a pulley. Additional weights can be placed on the rotating plate to change the axial load on the thread. The thread efficiency can be determined and compared using the measured values. The unit is portable and is equipped with anti-slip feet to ensure that it remains stable. The painted metal base plate is fitted with clips for the individual parts.
Learning Objectives / Experiments
· Determination of the coefficient of friction of a threaded spindle with
- A gunmetal nut,
- A bronze nut,
- A plastic nut
· Determination of the respective thread efficiency
Features
Unit for determining the thread efficiency of different materials
Alternative products
TM 300 -- Screw Jack
TM 320 -- Screw Tester
Specification
[1] Table-top experiment on thread efficiency with different materials
[2] Spindle thread: TR30x6 and TR30x12P6
[3] Nuts made of gunmetal, bronze and plastic
[4] Plate diameter: Ø140mm
[5] Spring balance: 0...5N, graduations 0.05N
[6] Load weights: 10N and 20N
[7] l x w x h 300x300x300mm
Technical Data
Spindle thread: TR30x6 and TR30x12P6
Nuts made of gunmetal, bronze and plastic
Plate diameter: Ø140mm
Spring balance: 0...5N, graduations 0.05N
Load weights: 10N and 20N
Dimensions and Weight
l x w x h : 300 x 300 x 300 mm
Weight : approx. 15 kg
Scope of Delivery
1 complete experimental apparatus,
1 instruction manual
Order Details
040.31000 TM 310 Thread Efficiency Testing Equipment
© 2005 G.U.N.T. Gerätebau GmbH