Products  |  Theory of Machines and Properties of Materials  |  Applied Physics  |  EM 043
EM 043 Reaction of Beams Apparatus Show data sheet (pdf file)
Technical Description
Using this table unit, the relationship between load and reaction forces on a rigid, statically defined beam can be investigated experimentally. The unit consists of a rigid beam that can be placed in a section frame. The beam is loaded using a set of weights that can be positioned as required. A millimetre scale is fitted to the beam to enable the position of the load to be determined. Two spring balances are integrated into the unit for measuring the reaction forces. The different deflections of the bearings as a result of the extension of the spring balances can be compensated using adjustment bolts.
Learning Objectives / Experiments
· Determination of the reaction forces on a beam as a function of the point of application of the force
Features
Bearing reactions on a stiff beam
Table unit for laboratory experiments and demonstrations
Alternative products
EM 044 -- Forces on a Beam Apparatus
SE 110.12 -- Experimental Set Influence Line
SE 110.52 -- Experimental Set Equilibrium of Parallel Forces
SE 110.54 -- Experimental Set Equilibrium of a Beam
Specification
[1] Table unit for investigating the reaction forces on a stiff beam for varying load application points
[2] Beam length 800mm
[3] Spring balance: 0...50N
[4] Compensation of the measurement displacement of the dynamometer by means of integrated adjustment bolts
[5] Base frame made of aluminium section
Technical Data
Beam length: 800mm
Beam weight: 6N
Weights: 12x 1N, 12x 5N, 3x1N (carrier)
Spring balance: 0...50N
Dimensions and Weight
l x w x h : 1100 x 350 x 1000 mm
Weight : approx. 25 kg
Scope of Delivery
1 support, 1 beam, 3 set of weights,
2 spring balances, 1 instruction manual
Order Details
049.04300 EM 043 Reaction of Beams Apparatus
© 2005 G.U.N.T. Gerätebau GmbH