Products  |  Theory of Machines and Properties of Materials  |  Applied Physics  |  EM 051
EM 051 Extension of Wires Apparatus Show data sheet (pdf file)
Technical Description
The experimental apparatus for wall mounting demonstrates the relationship between tensile loading and elastic elongation of wires. It permits conclusions to be made on the material characteristics. Wire specimens with eyes are hung on a wall mounted carrier. The bottom ends are attached to two sliders. A traverse links the wires and enables an even load to be applied. The set of weights for loading the wires is hung from the traverse. The elongation of the wires as a result of the tensile force can be read on the sliders, these are equipped with verniers.
Learning Objectives / Experiments
· Elastic elongation of metal wires subject to tensile force
- As a function of the load
- As a function of the diameter of the wire
- Determination and checking of the modulus of elasticity
Features
Clearly laid out unit for wall mounting
Measurement of the elongation by means of verniers
Alternative products
EM 052 -- Deformation of Springs Apparatus
SE 110.56 -- Experimental Set Modulus of Elasticity
TM 400 -- Apparatus to Investigate Hooke`s Law
Specification
[1] Wall unit for experiments on the elastic deformation of metal wires subject to tensile force
[2] Loading of wires using a set of weights
[3] Wire length 2000mm
[4] Wire diameter Ø1mm and Ø2mm
[5] Material steel, aluminium, brass and copper
[6] Load max. 50N per wire
[7] Measuring device equipped with verniers
Technical Data
Wire length: 2000mm
Wire diameter: Ø1mm, Ø2mm
Materials: steel, cooper, brass, aluminium
Load: max. 50N per wire
Weights: 5N, 10N, 20N, 50N
Dimensions and Weight
l x w x h : 290 x 135 x 2620 mm
Weight : approx. 15 kg
Scope of Delivery
1 experimental apparatus, complete, 6 wires, 1 set of weights, 1 instruction manual
Order Details
049.05100 EM 051 Extension of Wires Apparatus
© 2005 G.U.N.T. Gerätebau GmbH