Products  |  Theory of Machines and Properties of Materials  |  Applied Physics  |  EM 100
EM 100 Educational Apparatus Bending and Torsion Show data sheet (pdf file)
Technical Description
Using this table unit, the fundamental principles of elastostatics are investigated experimentally. The relationships between load, material, geometrical dimensions and the deformation that occurs are demonstrated. The unit consists of a sturdy base plate and two support pillars. Using a set of weights, a bending load can be applied at any point along the bar. A lockable lever of 100mm length facilitates the generation of torsion moments. Using a dial gauge, the deflection in the middle of the bar or the twist on the free end of the torsion bar can be measured.
Learning Objectives / Experiments
· Bending experiments on bars on two supports
· Bending experiment on a cantilever arm
· Torsion on bars
· Determination and checking of the modulus of elasticity of the bar material
· Determination and checking of the shear modulus of the bar material
Features
Elastostatic bending and torsion experiments on steel, aluminium and copper specimens
Alternative products
SE 110.09 -- Experimental Set Deflection of Beams
SE 110.14 -- Experimental Set Continuous Beam
SE 110.29 -- Experimental Set Torsion of Rods & Tubes
SE 120 -- Structure Demonstration Model, Set of 7 Experiments
WP 100 -- Apparatus for Testing Torsion and Deflection
WP 950 -- Beam Apparatus
Specification
[1] Table unit for bending and torsion experiments on bars and rods to investigate elastostatic principles
[2] Bar material: steel, aluminium, copper
[3] Measured length 600mm
[4] Bar cross-section 20x4mm
[5] Bar diameter Ø8mm
[6] Weight set up to 20N
Technical Data
Measured length: 600mm
Bending bar cross-section: 20x4mm
Torsion bar diameter: Ø8mm
Position measurement gauge: 0...10mm
Bar material: aluminium, copper, steel
Dimensions and Weight
l x w x h : 725 x 300 x 460 mm
Weight : approx. 18 kg
Scope of Delivery
1 experimental apparatus, complete, 6 specimen bars, 1 set of weights, 1 instruction manual
Order Details
049.10000 EM 100 Educational Apparatus Bending and Torsion
© 2005 G.U.N.T. Gerätebau GmbH