Products  |  Theory of Machines and Properties of Materials  |  Applied Physics  |  EM 097
EM 097 Governor Demonstration Unit Show data sheet (pdf file)
Technical Description
The model is used to demonstrate the principle of operation of governors. Three of the most well known governors are supplied in the kit. The configuration of the various governors can be changed. The centrifugal weights and the sleeve weights can be varied. The different governors are fitted to a vertical shaft. The governors are placed in motion using a hand crank via an angled drive. The speed ranges are so selected that the speed can easily be measured by counting the revolutions of the crank and using a stopwatch. The flywheel with its large mass makes it easier to maintain a constant speed.
Learning Objectives / Experiments
· Porter governor
· Proell governor
· Hartnell governor
Features
Manually operated table model for the demonstration of the principles of operation of three different governors
Alternative products
EM 028 -- Rotational Apparatus
TM 632 -- Governor Apparatus
Specification
[1] Table model for the demonstration of the principles of operation of three different governors
[2] Manual operation using crank
[3] Drive transmission ratio 1:4
[4] Porter governor
[5] Proell governor
[6] Hartnell governor
Technical Data
Drive transmission ratio: 1:4
Lifting speed, Porter governor: < 100rpm
Lifting speed, Proell governor: < 100rpm
Lifting speed, Hartnell governor: < 80rpm
Dimensions and Weight
l x w x h : 420 x 400 x 480 mm
Weight : approx. 23 kg
Scope of Delivery
1 experimental apparatus, 3 governors, 1 instruction manual
Order Details
049.09700 EM 097 Governor Demonstration Unit
© 2005 G.U.N.T. Gerätebau GmbH