Products  |  Theory of Machines and Properties of Materials  |  Dynamics  |  TM 632
TM 632 Governor Apparatus Show data sheet (pdf file)
Technical Description
This table unit is used to demonstrate the principle of operation of various centrifugal force governors. The drive with an electronically regulated motor is fitted in the housing. The speed is continuously adjusted using a 10-turn potentiometer and displayed digitally. The governor is placed in a chuck on the drive. The centrifugal masses and sleeve forces can be varied using the accessories included. The stroke can be measured using the marks on the governor shaft. When in operation, a transparent protective lid covers the rotating centrifugal governor. The unit can only be placed in operation if the lid is correctly fitted. The unit is simply placed on a table in the laboratory for operation. It only requires a supply of power.
Learning Objectives / Experiments
Kinetics and kinematics of the following centrifugal governor systems:
· Porter governor
· Proell governor
· Hartnell governor
Features
· Determination of the characteristic curves of different centrifugal force governors
Alternative products
EM 028 -- Rotational Apparatus
EM 097 -- Governor Demonstration Unit
TM 600 -- Centrifugal Force Apparatus
Specification
[1] Demonstration of the principle of operation of various centrifugal force governors
[2] Porter, Proell and Hartnell governors
[3] DC drive motor 10...30V
[4] Rotational speed: 60...400rpm, electronically regulated, with digital display
[5] Power supply 230V, ~50Hz
[6] l x w x h 420x400x430mm
Technical Data
Rotational speed: 60...400rpm, digital display
Power supply 230V, ~50Hz
Dimensions and Weight
l x w x h : 420 x 400 x 430 mm
Weight : approx. 30 kg
Scope of Delivery
1 apparatus, 3 governors, 1 instruction manual
Order Details
040.63200 TM 632 Governor Apparatus
© 2005 G.U.N.T. Gerätebau GmbH