Products  |  Fluid Mechanics and Hydrology  |  Hydrology and Hydraulic Engineering  |  HM 167
HM 167 Ground Water Flow Show data sheet (pdf file)
Technical Description
This unit for the investigation of ground water flows and drainage processes is fitted to a trolley. It consists primarily of a plastic tank that is filled with fine gravel for the experiments. Inlet and outlet pipes facilitate the production of a flow of water through the layer of gravel. Measuring connections are fitted to the base of the tank, these are connected to tube manometers using hoses so that the water levels can be displayed on a measuring station. Inserts supplied with the unit facilitate the simulation of excavations and wells. The gravel filling is not included.
Learning Objectives / Experiments
· Determination of the ground water level between inlet and outlet
· Ground water profile at an outlet
· Comparison of different profiles, combinations
· Water breakthrough into graves and excavations
· Ground water investigations with concentric load on the subsoil
· Investigation of drainage processes in excavations with supporting walls
Features
Unit for the investigation of ground water flows and drainage processes
Flexible in use due to trolley
Alternative products
HM 165 -- Basic Hydrology System
HM 169 -- Drainage and Seepage Tank
Specification
[1] Unit for the investigation of ground water flows
[2] Plastic tank 250ltr, for filling with gravel
[3] 19 measuring connections on the base of the tank, with sintered metal filters
[4] 19 tube manometer 300mmWG
[5] Unit on laboratory trolley
[6] Regulator valve for adjusting the flow rate
[7] PVC pipework
Technical Data
Plastic tank,
Capacity 250ltr
19 measuring connections on the base of the tank
19 tube manometer,
Measuring range 300mmWG
Dimensions and Weight
l x w x h: 1155 x 720 x 805 mm
Empty weight: approx. 85 kg
Scope of Delivery
1 experimental set-up, complete, 3 models,
1 instruction manual
Order Details
070.16700 HM 167 Ground Water Flow
© 2005 G.U.N.T. Gerätebau GmbH