Products  |  Fluid Mechanics and Hydrology  |  Turbomachines  |  HM 300
HM 300 Basic Centrifugal Pump Show data sheet (pdf file)
Technical Description
The HM 300 testing stand represents a simple pump circuit that enables various experiments to be performed. Amongst other aspects, the model can be used to demonstrate the analogy between a hydraulic circuit and an electrical circuit. The set-up includes a centrifugal pump, a variable-area flow meter, an electronic differential pressure gauge, a valve inserted in the measuring section, a water tank and other fittings. Annular chambers are used for making pressure measurements in the circuit.
Learning Objectives / Experiments
· Recording a pump characteristic curve
· Pressure losses on various fittings
· Pressure losses on valves as a function of the flow rate
Features
Clearly laid out centrifugal pump on mobile demonstration stand
Alternative products
HM 150.04 -- Variable Speed Centrifugal Pump
HM 283 -- Centrifugal Pump Demonstrator
HM 305 -- Industrial Centrifugal Pump
Specification
[1] Testing stand on mobile support
[2] l x w x h 1110x610x1430mm, 55kg
[3] Centrifugal pump with plastic housing
[4] Differential pressure measurement with electronic sensor, measuring range 0...1000mbar
[5] Closed water circuit with tank 20ltr
[6] Flow rate measurement with variable-area flowmeter 1600ltr/h
Technical Data
Pump: 230V,~50Hz, power consumption 66W
Pump head 3.2m, Qmax= 2.04m³/h, plastic
Flow meter: Qmax=1600ltr/h, plastic
Battery operated differential pressure gauge: measuring range 0...1000mbar
Dimensions and Weight
l x w x h : 1110 x 610 x 1430 mm
Empty weight: approx. 55 kg
Scope of Delivery
1 system, complete on trolley, 1 set of accessories, 1 instruction manual
Order Details
070.30000 HM 300 Basic Centrifugal Pump
© 2005 G.U.N.T. Gerätebau GmbH