G.U.N.T. - Equipment for engineering education

Products | Theory of Machines and Properties of Materials | Statics | TM 110

TM 110

Apparatus for Statics Experiments

Technical Description

The unit enables the fundamentals of statics, such as equilibrium, force resolution, the principles of levers, and similar issues to be clearly demonstrated. The base unit is a free-standing mounting board. All the parts necessary for the experiment can be quickly attached to the rails that are attached to the edge of the board. The printed 50-mm grid enables structures to be accurately assembled. The co-ordinates provided by the grid make the additional measurement of angles unnecessary. Two ball bearings facilitate low friction torque experiments. The dynamometers are of particularly large diameter for demonstration purposes. A special educational feature is the ability to write directly on the board using fibre-tip pens. The individual parts are supplied in a storage tray.

Learning Objectives / Experiments

· Addition and resolution of forces with force parallelogram
· Force equilibrium
· Principles of levers, moment and moment equilibrium
· Forces in supports
· Force deflection and distribution by fixed and moving rollers

Also with supplementary sets:
· Inclined Plane & Friction (TM 110.01)
· Hoists (TM 110.02)
· Gears (TM 110.03)

Features

Versatile Unit for Demonstrations and Experiments to Illustrate Planar Mechanical Systems of Forces

Available accessories

TM 110.01 -- Supplementary Kit Inclined Plane and Friction
TM 110.02 -- Supplementary Kit Block and Tackle
TM 110.03 -- Supplementary Kit Gear Systems

Alternative products

EM 043 -- Reaction of Beams Apparatus
EM 047 -- Tension Coefficient Apparatus
EM 049 -- Simple Moments Apparatus
SE 110.51 -- Experimental Set Equilibrium of Forces
SE 110.52 -- Experimental Set Equilibrium of Parallel Forces

Specification

[1] Experiment and demonstr. system for the fundamentals of simple planar systems of forces
[2] Mounting board, can be written on directly WxH 600 x 700 mm with printed 50-mm grid
[3] Large force dials for tensile and compressive forces, Ø110 mm
[4] Clip-on experiment set up
[5] Individual parts in portable storage tray

Technical Data

Mounting board WxH: 600 x 700 mm, printed with 50-mm grid
Force dials for tensile and comp. force: 0...50 N
Dial diameter Ø110 mm
Weight sets up to 20 N, increments of 5 N

Dimensions and Weight

Mounting board: WxH 600 x 700 mm
Tray: LxWxH 600 x 400 x 150 mm

Connections

1 mounting board, 1 experiment set with storage tray, 1 set of instructions

Scope of Delivery

1 assembly panel, 1 experiment set with storage tablet, experiment instructions

Order Details

040.11000 TM 110 Apparatus for Statics Experiments