G.U.N.T. - Equipment for engineering education

Products | Mechatronics | Dimensional Metrology | PT 102

PT 102

Dimensional Metrology I: Training Kit 2

Technical Description

This dimensional metrology practice kit is designed for practical training in the metalworking trades and follows the tried and proven concept of the Bundesinstitut für Berufsbildung (BIBB; Federal Institute for Vocational Training).
The kit offers the advantage of being ready for use immediately; it contains everything required for the exercises. The test pieces used are stainless steel bearing plates. They were manufactured with the accuracy of CNC parts. The kit includes ten bearing plates, all of which differ to a minor degree in dimensions and each of which is individually marked.
All parts are clearly laid out and well protected on a moulded plastic tray. The trays are stackable, providing for space-saving storage.

Learning Objectives / Experiments

- Familiarisation with vernier caliper gauge, depth caliper gauge,

external micrometer and internal micrometer
- Measurement of pre-determined lengths, depths and diameters
- Keeping a measurement log
- Estimating measurement variations
- Identifying typical errors

Features

* Tried and tested dimensional metrology exercises₁
* Instructional kit with test aids and 10 test pieces₁
* Comprehensive and well-structured instructional

material

Alternative products

PT 101 -- Dimensional Metrology I: Training Kit 1
PT 103 -- Dimensional Metrology I: Training Kit 3
PT 104 -- Dimensional Metrology I: Training Kit 4
PT 105 -- Dimensional Metrology I: Training Kit 5
PT 106 -- Dimensional Metrology I: Training Kit 6
PT 201 -- Dimensional Metrology II: Training Kit 1
PT 202 -- Dimensional Metrology II: Training Kit 2

Specification

[1] Training kit for dimensional metrology in the metalworking trades
[2] Measurement exercises on a stainless steel bearing plate
[3] Instructional kit complete with test pieces and measuring aids
[4] 10 test pieces, each of different dimensions
[5] All parts clearly laid out and well protected on a plastic tray
[6] Detailed instructional material according to BIBB concept

Technical Data

Test pieces: 9 lengths, 4 depths, 4 diameters measurable
Vernier caliper gauge: 0...200mm
Pocket caliper gauge : 0...150mm
Depth caliper gauge : 0...150mm
External micrometer : 0...25mm, resolution: 0.01mm
Depth micrometer : 0...75mm

Dimensions and Weight

l x w x h : 500 x 350 x 110 mm (tray)
Weight : approx. 7 kg

Scope of Delivery

1 plastic tray, 1 vernier caliper gauge, 1 pocket caliper gauge, 1 depth caliper gauge, 1 external micrometer, 1 depth micrometer, 10 test pieces (bearing plates), 1 instruction manual

Order Details

052.10200 PT 102 Dimensional Metrology I:
Training Kit 2