G.U.N.T. - Equipment for engineering education

Products | Mechatronics | Automation | RT 770

RT 770

Training System: Pneumatics, Electro-Pneumatics and PLC

Technical Description

The RT 770 is a fully equipped training system with all necessary components and aids to conduct a comprehensive training course in the fundamentals of pneumatic and electro-pneumatic controls. The didactic structure of the course is based on the long-established BIBB training concept. In addition to the BIBB course experiments, RT 770 also includes a PLC (programmable logic controller).
The system comprises standard industrial components. The board-mounted components are securely attached to the assembly panels by a special quick-clamping system. The assembly area consists of two panels that are arranged in a roof-like configuration and can be used simultaneously. Pneumatic and electro-pneumatic circuits are constructed with the aid of pneumatic hoses and laboratory cables. A miniature compressor supplies the experiments with compressed air.

The sturdy trolley provides clearly laid out storage for the components.

An extensive package of literature and media is supplied.

Learning Objectives / Experiments

- Physical principles of pneumatics and

electro-pneumatics
- Fundamentals of, and terms used in, process

control
- Design and function of pneumatic components
- Logic elements, logic diagram
- Multi-way valves, pressure, shut-off and flow control

valves
- Controls with starting and set-up conditions

(automatic/manual/jog mode)
- Controls with boundary conditions
- Routing and time controls (process and time

controlled sequencers)
- Position-dependent controls
- PLC: counter function, shift register, sequencers
- Troubleshooting and commissioning

Features

* Complete training system providing an experimental

introduction to the fundamentals of pneumatics and

electro-pneumatics - with PLC₁
* Experiment scope and configuration based on the

tried and proven concept course developed by the

Bundesinstitut für Berufsbildung (BIBB; Federal

Institute for Vocational Training)₁
* 2 large-format metal assembly panels for fast, secure

component mounting₁
* Sturdy base construction, mobile, with drawer system

for storage

Specification

[1] Comprehensive trainer for demonstration and exercises in pneumatics, electro-pneumatics and PLCs
[2] 2 perforated metal panels for quick component fixing
[3] Standard industrial pneumatic and electro-pneumatic components
[4] Various multi-way valves, pressure, shut-off and flow control valves
[5] Electric limit switch, various proximity switches, solenoid valves, signal board
[6] PLC with programming software
[7] Integrated power supply unit to supply the electro-pneumatics and the PLC
[8] 2x maintenance units + distributor block for simultaneous use of both panels
[9] Hoses, cables and tools to construct the experiments
[10] Miniature compressor for compressed air supply
[11] 230V, 50Hz, 1 phase

Technical Data

2 assembly panels: l x h: 1100x700mm each
Compressor:
- tank: 25ltr
- intake capacity: 50ltr/min
- power output: 32ltr/min at 8bar
- max. pressure: 8bar
- motor: 0.34kW
PLC:
- inputs: 9
- outputs: 7
- program memory: 1012 instructions, EEPROM
Size of components: nominal width 3
Pneumatic hose: 4/2mm
Power supply unit: 24VDC, 4A

Dimensions and Weight

l x w x h : 1520 x 750 x 1600 mm
Weight : approx. 130 kg

Connections

230V, 50Hz, 1 phase

Scope of Delivery

1 training system, complete
1 miniature compressor
1 PLC with software
1 set of instructional material

Order Details

080.77000 RT 770 Training System: Pneumatics,

Electro-Pneumatics and PLC