G.U.N.T. - Equipment for engineering education

Products | Thermodynamics, Heating and Sanitary Systems | Power Engines and Machines | ET 513

ET 513

Single-Stage Compressor Module

Technical Description

The experimental module enables investigations and experiments to be performed on a single-stage compressor system.
The compressed air generated is stored in a tank and is available as working medium. The HM 365 Universal Drive and Brake Unit is required to operate the experimental module. It contains the motor that drives the ET 513 module via a V-belt. Speed and torque measurements are also integrated in the HM 365. The system is equipped with electronic sensors for pressure, flow rate, speed and temperature measurements which facilitate PC data acquisition.
The measured data can be transmitted to a PC for further processing via the HM 365.

Learning Objectives / Experiments

- Measurement of:
+ intake and delivery pressure
+ airflow rate
+ compressor speed
+ temperatures
- Determination of the volumetric and isothermal
efficiency

Features

* Part of equipment series for the investigation of
engines and machines₁
* Investigations on a power machine₁
* PC data acquisition

Available accessories

HM 365 -- Universal Drive and Brake Unit

Alternative products

ET 500 -- Two-Stage Piston Compressor Unit
ET 512 -- Air Compressor Test Unit

Specification

[1] Mobile module to investigate a machine
[2] l x w x h 910x830x1520mm, 80 kg
[3] Electronic sensors and displays for air flow rate, pressure, temperature and compressor speed
[4] Intake vessel, with nozzle to measure the airflow rate, pressure transducer and additional manometer
[5] Pressure vessel with safety valve, control valve and outlet silencer, additional manometer
[6] PC data acquisition with LabView software under Windows XP
[7] Drive via V-Belt, motor in HM 365

Technical Data

Compressor, 1 cylinder, single-stage

- power consumption: 750W

- nominal speed: 980rpm

- operating pressure: 8bar

- max. pressure: 10bar

- intake capacity: 150L/min at 8bar

- bore: 65mm

- stroke: 46mm
Safety valve blow off pressure: 10bar
Pressure vessel

- 16bar

- capacity: 10L

Intake vessel: 20L

Measuring ranges

- temperature: 2x 0...200°C

- pressure: -1...1bar / 0...16bar

- differential pressure: 0...10mbar

- 2 manometers: -1...1.5bar / 0...16bar

Dimensions and Weight

l x w x h : 910 x 830 x 1520 mm
Weight : approx. 80 kg

Connections

Power supply: via HM 365

Scope of Delivery

1 module

1 software

1 instruction manual

Order Details

061.51300 ET 513 Single-Stage Compressor
Module