G.U.N.T. - Equipment for engineering education

Products | Thermodynamics, Heating and Sanitary Systems | Internal Combustion Engines | CT 159 | CT 150

CT 150

Four-Stroke Petrol Engine for CT 159

Technical Description

The air-cooled four-stroke petrol engine is securely mounted on a base plate with vibration dampers. The plate is fitted in the mounting provided on the CT 159 test stand and bolted into place. A covered V-belt drive is used to connect it to the HM 365 brake unit. The engine contains a sensor for measuring the exhaust gas temperature, which is connected to the CT 159 display and control panel. The fuel supply hose has a self-sealing quick-release coupling.

Learning Objectives / Experiments

In conjunction with CT 159 test stand and HM 365 brake unit
- Familiarisation with a four-stroke petrol engine
- Plotting of torque and power curves
- Determination of specific fuel consumption
- Determination of volumetric efficiency
- Determination of excess air factor
- Determination of engine friction loss

Features

* Test engine for use in CT 159 test stand

Specification

[1] Air-cooled single cylinder petrol engine for installation in CT 159 test stand
[2] Engine mounted on a base plate with vibration dampers
[3] Power transmission to brake unit via V-belt drive
[4] Engine completely equipped with fuel line and an exhaust gas temperature sensor

[5] Fuel hose with self-sealing quick-release coupling

Technical Data

Air-cooled 1 cylinder engine
- power output: 2.6kW at 3600rpm
- bore: 65.1mm
- stroke: 44.4mm
V-belt: D=125mm

Dimensions and Weight

l x w x h : 515 x 345 x 370 mm
Weight : approx. 17 kg

Scope of Delivery

1 engine, complete with all connections and supply lines
1 instruction manual

Order Details

063.15000 CT 150 Four-Stroke Petrol Engine

for CT 159