Products  |  Thermodynamics, Heating and Sanitary Systems  |  Heating and Ventilation  |  HL 103
HL 103 Fitting Loss Training Panel Show data sheet (pdf file)
Technical Description
Four measured sections are fitted to the panel, each comprising ten elbows and bends in different layouts. The overall length of each section is the same. It is possible to measure the pressure loss and to investigate the effects of material, surface roughness and flow rate. The water flows through a pipe with a manual valve and flow meter before passing through the measured sections. The section under test is connected with a hose.
The training panel needs a supply of water.
The training panel can be fitted to the HL 100 Universal Stand.
Learning Objectives / Experiments
· Flow rate measurement
· Differential pressure measurement
· Effect of material and pipe wall roughness
· Effect of flow rate
· Effect of bend radius
Features
Portable training panel for investigating pressure loss in pipe fittings
Four different measuring sections with elbows and bends
Hose connections with quick action couplings
Operation independent of mains electricity
Available accessories
HL 090 -- Supply Bench for Training Panels
HL 100 -- Universal Stand for Training Panels
Alternative products
HL 102 -- Pipe Friction Training Panel
HL 113 -- Valve Loss Training Panel
HM 150.29 -- Losses in Bends and Fittings
Specification
[1] Training panel for investigating the pressure losses in pipe fittings such as elbows and bends
[2] l x w x h 1650x200x1100mm, 52kg
[3] 4 different measuring sections, measured length of each section 2300mm, 10 elbows/bends
[4] Pressure measurement with annular chambers with electronic differential pressure gauge
[5] Flow rate measurement with rotameter
[6] Hose connections made using quick action coupling
[7] Water feed via pressure reducer
[8] Cold water connection
Technical Data
Differential pressure gauge with bleed
- measuring range: 0...2000mbar
- supply: 9V, battery-operated
Rotameter: measuring range 150...1600ltr/h
Outlet pressure at pressure reducer: 0.5...2bar
Pipe sections: measured length: 2300mm
- Pipe section 1: steel, 1/2", 90° elbow
- Pipe section 2: steel, 1/2", 90° bend
- Pipe section 3: copper 18x1mm, 90° elbow
- Pipe section 4: copper 18x1mm, 90° bend
Dimensions and Weight
l x w x h : 1650 x 200 x 1100 mm
Weight : approx. 52 kg
Connections
Water connection 1500ltr/h
Scope of Delivery
1 training panel, completely assembled, 1 connecting hose, 1 instruction manual
Order Details
065.10300 HL 103 Fitting Loss Training Panel
© 2005 G.U.N.T. Gerätebau GmbH