G.U.N.T. - Equipment for engineering education

Products | Thermodynamics, Heating and Sanitary Systems | Heating and Ventilation | HL 210

HL 210

Losses in Pipe Systems and Fittings

Technical Description

The friction loss occurs at elbows, bends, shut-off devices and also at special pipe fittings such as a thermostatic valve or a reducer. The pressure differences can be shown on a multiple water tube manometer as head loss. The panel uses a closed water circuit with supply tank and pump.
A supply of mains electricity is necessary for operation.

Learning Objectives / Experiments

· Effect of the flow rate, pipe diameter and changing cross-section, as well as various pipe fittings on friction loss
· Determination of operating point, pump and pipework characteristics

Features

Clearly laid out demonstration stand for the visualisation of friction loss

Alternative products

HL 102 -- Pipe Friction Training Panel
HL 107 -- Circulating Pumps Training Panel
HL 111 -- Fluid Friction Training Panel
HL 630 -- Heating System Training Panel with PC Control

Specification

[1] Panel for the demonstration and visualisation of friction loss
[2] Investigation of the friction loss in pipe constrictions, elbows, bends, fittings
[3] 13-tube manometer
[4] Circulating pump, 3 stages, max. 60W
[5] Rotameter
[6] 230V, 50Hz, 1 phase

Technical Data

13-tube manometer 1600mmWC
Flow rate measuring range: 0...1000ltr/h
Supply tank: approx. 5ltr
Circulating pump: max. flow rate: 60ltr/min, max. head 4m

Dimensions and Weight

l x w x h : 1650 x 780 x 1800 mm
Weight : approx. 90 kg

Scope of Delivery

1 panel, complete, 1 instruction manual

Order Details

065.21000 HL 210 Losses in Pipe Systems and Fittings