G.U.N.T. - Equipment for engineering education

Products | Thermodynamics, Heating and Sanitary Systems | Heating and Ventilation | HL 510

HL 510

Domestic Gas Supply Training Panel

Technical Description

The experiments are performed with air. A compressed air connection with reservoir and pressure reducer are included on the panel. The panel has two pipe circuits that can be individually selected. Various leaks can be simulated in one gas line. The other line represents a normal gas supply pipe. A gas meter is fitted in each line. Typical industrial components are used. Leak detection and installation work can be performed on gas pipes by the trainee. A compressed air supply is required for operation.
The training panel can be fitted to the HL 100 Universal Stand.

Learning Objectives / Experiments

· Simulation of different leaks
· Demonstration of leak detection
· Working on gas pipes
· Testing before and after gas connection in accordance with regulations

Features

Experimental set-up for exercises on gas pipes

Available accessories

HL 090 -- Supply Bench for Training Panels
HL 100 -- Universal Stand for Training Panels

Specification

[1] Trainer for exercises on gas pipes
[2] 2 individually selectable pipe sections
[3] Single pipe and two pipe gas meters provided
[4] Pipe section "1" for finding leaks
[5] Pipe section "2" as supply pipe with gas outlet and gas isolating ball valve
[6] Compressed air supply

Technical Data

Air pressure controller: max. inlet pressure: 21bar, outlet pressure 0.01...0.6bar
Gas pressure controller: admission pressure 350mbar, outlet pressure: 20mbar
Piping tester: max. 500mmWC

Dimensions and Weight

l x w x h : 1650 x 200 x 1100 mm
Weight : approx. 50 kg

Scope of Delivery

1 training panel, 1 piping tester with extension, 1 gas leak detecting spray, 1 manual

Order Details

065.51000 HL 510 Domestic Gas Supply Training Panel