Products  |  Fluid Mechanics and Hydrology  |  Turbomachine Demonstrators  |  HM 284
HM 284 Series / Parallel Pump Demonstrator Show data sheet (pdf file)
Technical Description
The HM 284 demonstration unit facilitates the measurement of pump curves in various operating modes. The unit comprises 2 identical centrifugal pumps that are connected together via a system of pipes. Shut off valves permit the pumps to be operated in series or in parallel. Electronic sensors provide relevant pressures, the temperature of the pumped medium, and the rotational speed of the drive motors are measured values. The flow rate of the pumps can be adjusted using power adjusters. The following accessories are required for operation: an Interface Module (HM 280.01), Data Acquisition Card with Software (HM 280.03) and a Set of Connecting Cables (HM 280.04). This layout makes it possible to record measured values during the experiments, and process and store this data on a PC. Power Meters (2x HM 280.05) are a practical way to expand the unit.
Learning Objectives / Experiments
· Investigation of the operating behaviour of pumps
- On the operation of one pump
- When operated in series
- When operated in parallel
· Recording of pump curves
· Determination of the efficiencies of different operating modes
Features
Clearly laid out demonstration unit for student experiments
Processing of the measured data on a PC
Sealed water circuit
Practice-related design
Available accessories
HM 280.01 -- Interface Module
HM 280.03 -- Data Acquisition Card with Software
HM 280.04 -- Set of Connecting Cables
HM 280.05 -- Power Meter, 0...2000 W
Alternative products
HM 150.16 -- Twin Centrifugal Pump Configurations
HM 283 -- Centrifugal Pump Demonstrator
HM 330 -- Series / Parallel Pumps
HM 365.14 -- Series / Parallel Pumps Module
Specification
[1] Portable demonstration unit for series, parallel and individual operation of centrifugal pumps
[2] lxwxh 1000x600x720mm, 65kg
[3] Electronic sensors
[4] Processing of measured data on a PC
[5] Flow rate measurement using an orifice and differential pressure measurement, measuring range 0..6m³/h
[6] Pipes and fittings made of PVC
[7] Supply tank 20Ltr
[8] Maintenance-free system
[9] 230V, ~50Hz
Technical Data
Pumps: Qmax= 2.4m³/h, max. head 40m
Engines: 0.37kW
Measuring range for pressure measurement: 0...10bar
Measuring range for temperature measurement 0...60°C
Measuring range for speed measurement: 0...3000rpm
Flow rate measurement using orifice and differential pressure measurement: 0..6m³/h
Dimensions and Weight
l x w x h : 1000 x 600 x 720 mm
Weight : approx. 65 kg
Connections
230V, ~50Hz
Scope of Delivery
1 experimental set-up, completely assembled
Order Details
070.28400 HM 284 Series / Parallel Pump Demonstrator
© 2005 G.U.N.T. Gerätebau GmbH