Products  |  Thermodynamics, Heating and Sanitary Systems  |  Fundamentals of Thermodynamics  |  WL 203
WL 203 Methods of Pressure Measurement Show data sheet (pdf file)
Technical Description
The manometer panel contains 2 tube and 2 dial manometers for the demonstration of alternative measurement methods. Test pressures in the millibar range are generated with the aid of the supplied syringe. All manometers can be combined with one another using connecting hoses. It is possible to measure gauge pressure and vacuum. Dial and Bourdon tube manometers can be calibrated with a dead-weight piston gauge.
Learning Objectives / Experiments
- Familiarisation with different pressure measurement methods
- Function of a Bourdon tube manometer
- Pressure measurements with U-tube and Bourdon tube manometers
- Calibration of mechanical manometers
Features
* Comparison of different types of pressure
  measurement
* Comparison of different pressure measurement
  methods
Alternative products
HM 150.02 -- Dead-Weight Piston Gauge
Specification
[1] Benchtop unit using with measuring devices for pressure and vacuum
[2] U-tube and inclined tube manometers
[3] Bourdon tube manometer, pressure above atmospheric
[4] Bourdon tube manometer, pressure below atmospheric
[5] Plastic syringe generates test pressures in the millibar range
[6] l x w x h: 750x600x780mm, 37kg
Technical Data
Bourdon tube manometer: 0...60mbar
Bourdon tube manometer: -60...0mbar
U-tube manometer: 0...500mmWC
Slanted tube manometer: 0...500mmWC
Panel: l x w x h: 750x600x780mm, 12kg
Calibration device: l x w x h: 400x400x400mm, 25kg
Dimensions and Weight
l x w x h : 750 x 600 x 780 mm (panel)
Weight : approx. 37 kg
Scope of Delivery
1 panel, 1 calibration device, complete, 1 set of hoses, 1 instruction manual
Order Details
060.20300  WL 203  Methods of Pressure
                     Measurement
© 2005 G.U.N.T. Gerätebau GmbH