Products  |  Theory of Machines and Properties of Materials  |  Material Testing  |  WP 300  |  WP 300.10
WP 300.10 Device for Shearing Experiments Show data sheet (pdf file)
Technical Description
During the shear test, shearing forces are generated in a material specimen. The shear jig for this experiment comprises the two hardened shearing anvils for retaining the specimen and the tension lug with hardened shear tongue. The tongue reaches between the two shearing anvils without play. This results in the specimen being subject to double shear. Misleading bending loads are thus largely avoided. The jig is easy to install in the tensile section of the tester. Specimens of 6mm diameter copper are used.
Learning Objectives / Experiments
· Application of shear to a metal specimen
Features
· No misleading bending loads
· Type of shear loading as on rivets and bolts
Specification
[1] Supplementary experiment for the WP 300 universal material tester for shear loading bolts
[2] Test specimens made of electrical grade copper, Ø6x26mm
[3] Shearing anvil and tension lug made of hardened steel
[4] Double shear method avoids misleading bending stresses
[5] Quick assembly on the tension section of the WP 300
[6] Comprehensive experiment instructions, also as pdf
Technical Data
Specimen: Ø6x26mm made of electrical grade copper
Shearing anvil and tension lug made of hardened steel
Scope of Delivery
1 complete device for shearing experiments, 1 set of experiment instructions
Order Details
020.30010 WP 300.10 Device for Shearing Experiments
© 2005 G.U.N.T. Gerätebau GmbH