Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Aerodynamics and Airflow  |  HM 170  |  HM 170.34
HM 170.34 Static Pressure Probe Show data sheet (pdf file)
Technical Description
The probe provides the static pressure component in a flow as a measured value. The probe consists of a small brass tube closed on one side with 2 radial holes on the end. The arrangement of the measuring holes at a specific angle makes the measurement independent of direction over a wide range. The probe is connected to a slanted tube manometer. In this case one connection must be left open so that the partial vacuum of the static pressure can draw the column of liquid.
Learning Objectives / Experiments
· Measurement of the static pressure component in a fluid flow
Features
Measurement of the static pressure component in a fluid flow
Specification
[1] Probe for measuring pressure in a fluid flow
[2] Brass tube, nickel-plated, d=4mm, Length 360mm
[3] 2 holes d=0.8mm, 72.8° offset from each other
Technical Data
Hole diameter: 0.8mm
Angle between the holes: 72.8°
Dimensions and Weight
Diameter 4 mm, length 360 mm
Weight : approx. 200 g
Scope of Delivery
1 probe
Order Details
070.17034 HM 170.34 Static Pressure Probe
© 2005 G.U.N.T. Gerätebau GmbH