Products  |  Theory of Machines and Properties of Materials  |  Material Testing  |  WP 300  |  WP 300.14
WP 300.14 Chucks for flat tensile specimen Show data sheet (pdf file)
Technical Description
These specimen holders are available as an accessory for the WP 300 Universal Material Tester. They are used to enable flat tensile specimens, e.g. WP 300.25 to be tested. The two specimen holders are attached to the cross-member on the WP 300 using M16 bolts. The specimen holders have undercuts so that the flat specimens sit correctly and are held securely.
Learning Objectives / Experiments
· Tensile tests with WP 300.25 Flat Tension Specimens on the WP 300 Universal Material Tester
Features
Easy to assemble specimen holder for the tensile testing of flat specimens on the WP 300 Universal Material Tester
Specification
[1] Accessory set of clamps for holding flat tensile specimens on the WP 300 Universal Material Tester
[2] Joint to WP 300 via M16 thread
Technical Data
Mounting thread: M16
Dimensions and Weight
l x w x h : 50x50x63 mm
Scope of Delivery
2 sample holders
Order Details
020.30014 WP 300.14 Chucks for Flat Tensile Specimen
© 2005 G.U.N.T. Gerätebau GmbH