Products  |  Fluid Mechanics and Hydrology  |  Flow in Pipes  |  HM 500  |  HM 500.06
HM 500.06 Venturi Meter Show data sheet (pdf file)
Technical Description
The Venturi tube is a so-called orifice device, i.e. an increase in speed occurs due to a reduction in the cross-section of the pipe through which the fluid is flowing, this results in a measurable reduction in pressure, dp. The basis for this type of volumetric flow measurement is given by Bernoulli's equation and the law of continuity. As the Venturi tube is divided into a convergent inlet area and a divergent outlet area, the pressure losses are however significantly lower than on other orifice device, e.g. measuring nozzles or orifices. When using the device, attention must be paid to the direction of flow.
Learning Objectives / Experiments
· Familiarisation with a Venturi tube
· Flow rate measurement
· Preparation of a pressure loss curve
· Comparison with other flowmeters
Features
Flow rate measurement in accordance with Bernoulli and the law of continuity
Specification
[1] Accessory for the HM 500 Flowmeter Test Stand
[2] Venturi tube made of Plexiglass
[3] Connection to tube manometer
[4] Pressure loss measurement on the flowmeter using annular chambers
Technical Data
Operating position: horizontal
Reduction from 28.4mm to 14mm
Indication on tube manometer
Pipe connections DN 32
Operation with water
Dimensions and Weight
l x w x h: 820 x 150 x 200 mm
Weight : approx. 6 kg
Scope of Delivery
1 flowmeter, 1 instruction manual
Order Details
070.50006 HM 500.06 Venturi Meter
© 2005 G.U.N.T. Gerätebau GmbH