Products  |  Fluid Mechanics and Hydrology  |  Flow in Pipes  |  HM 500  |  HM 500.08
HM 500.08 Orifice Device Show data sheet (pdf file)
Technical Description
This unit is a so-called orifice device, i.e. an increase in speed occurs due to a reduction in cross-section, this results in a measurable reduction in pressure, dp. The basis for this type of volumetric flow measurement is given by Bernoulli's equation and the law of continuity. When using the device, attention must be paid to the direction of flow.
Learning Objectives / Experiments
· Familiarisation with a measuring orifice
· Flow rate measurement
· Preparation of a pressure loss curve
· Comparison with other flowmeters
Features
· Volumetric flow rate measurement using an orifice
· Fully visible operating area
Specification
[1] Accessory for the HM 500 Flowmeter Test Stand
[2] Operating area made of Plexiglass
[3] Measuring connections for tube manometer
[4] Pressure loss measurement on the flowmeter using annular connections
Technical Data
Operating position: vertical and horizontal
Orifice diameter: 18.5mm, with 45° chamfer
Pipe connections DN 32
Operation with water
Dimensions and Weight
l x w x h: 820 x 150 x 200 mm
Weight : approx. 6 kg
Scope of Delivery
1 flowmeter, 1 instruction manual
Order Details
070.50008 HM 500.08 Orifice Device
© 2005 G.U.N.T. Gerätebau GmbH