Products  |  Fluid Mechanics and Hydrology  |  Flow in Pipes  |  HM 500  |  HM 500.09
HM 500.09 Nozzle Device Show data sheet (pdf file)
Technical Description
The measuring nozzle is a so-called orifice device, i.e. an increase in speed occurs due to a reduction in the cross-section of the pipe through which the fluid is flowing, this results in a measurable reduction in pressure, dp. The basis for this type of volumetric flow measurement is given by Bernoulli's equation and the law of continuity. When using the device, attention must be paid to the direction of flow.
Learning Objectives / Experiments
· Familiarisation with a measuring nozzle
· Flow rate measurement
· Preparation of a pressure loss curve
· Comparison with other flowmeters
Features
· Volumetric flow measurement using a nozzle
· Fully visible operating area
Specification
[1] Accessory for the HM 500 Flowmeter Test Stand
[2] Operating area made of Plexiglass
[3] Measuring connections for tube manometer
[4] Pressure loss measurement on the flowmeter using annular connections
Technical Data
Operating position: vertical and horizontal
Nozzle opening 14mm
Pipe connections DN 32
Operation with water
Dimensions and Weight
l x w x h: 820 x 150 x 200 mm
Weight : approx. 6 kg
Scope of Delivery
1 flowmeter, 1 instruction manual
Order Details
070.50009 HM 500.09 Nozzle Device
© 2005 G.U.N.T. Gerätebau GmbH