G.U.N.T. - Equipment for engineering education

Products | Theory of Machines and Properties of Materials | Material Testing | WP 300 | WP 300.02

WP 300.02

Set of 4 Tension Test Rods: Aluminum, Copper, Steel, Brass

Technical Description

This set of tension test rods is available as an accessory for the WP 300 Universal Material Tester. The test rods comply with the requirements of DIN 50125 and are of circular cross-section. For marking the test length, there are two centre punch marks on the shafts. The ends of the test rods have M10 threads for attachment. The set contains one tension test rod made of aluminium (AlMgSi0,5F22), one of copper (E-Cu), one of brass (CuZn39Pb3) and one of steel (9SMn28).

Learning Objectives / Experiments

· Tensile tests with different materials on the WP 300 Universal Material Tester

Features

Tension test rods of round cross-section in accordance with DIN 50125 as accessories for the WP 300 Universal Material Tester

Specification

[1] Accessory set of tension test rods made of different materials for tensile tests using the WP 300 Universal Material Tester
[2] Test rods B 6 x 30 in accordance with DIN 50125,
round cross-section, attachment thread M10
[3] Test rod material: aluminium, copper, brass, steel

Technical Data

Tension test rods B 6x30 in acc. with DIN 50125
Test rod diameter: 6mm
Test length: 30mm
Total test rod length: 64mm
Attachment thread: M10

Scope of Delivery

1 aluminium test rod, 1 copper test rod, 1 steel test rod, 1 brass test rod

Order Details

020.30002 WP 300.02 Set of 4 Tension Test Rods: Al, Copper, Steel, Brass