Products  |  Fluid Mechanics and Hydrology  |  Hydrology and Hydraulic Engineering  |  HM 163  |  HM 163.43
HM 163.43 Wave Absorbing Beach, permeable Show data sheet (pdf file)
Technical Description
The HM 163.43 accessory is intended to enable the user to investigate the behaviour of waves on a rising beach; the unit is used in combination with the HM 163.41 Wave Generator. The stainless steel experimental arrangement represents a permeable gravel beach; the surface facing the waves is slotted, underneath the slots is a layer of coconut fibre. The underside of the beach body is also made of slotted expanded metal resulting in the water being able to seep through the beach body. The inclination of the beach body can be continuously adjusted. In this way it is easy to simulate different steeply rising beaches.
Learning Objectives / Experiments
· Investigation of the propagation of waves with varying water depth
· Investigation of deep and shallow water waves over a beach
· Investigation of different breaker types
· Energy transport in a wave
Features
· Simulation of a gravel beach
Specification
[1] Beach simulation for installation in the HM 163 Modular Flow Channel
[2] Beach body, retaining plate, inclination adjustment bar and locking bolt made of stainless steel
[3] Inclination up to a maximum of 18° provided
[4] Beach body top and underside made of slotted expanded metal, beach body filled with coconut fibre
Technical Data
Angle of inclination: 18°
Dimensions and Weight
l x w x h: 1300 x 404 x 480 mm
Weight : approx. 19 kg
Scope of Delivery
1 experimental arrangement,
1 set of accessories, 1 instruction manual
Order Details
070.16343 HM 163.43 Wave Absorbing Beach, permeable
© 2005 G.U.N.T. Gerätebau GmbH