Products  |  Fluid Mechanics and Hydrology  |  Hydrology and Hydraulic Engineering  |  HM 162  |  HM 162.55
HM 162.55 Parshall Flume Show data sheet (pdf file)
Technical Description
The HM 162.55 experimental set-up consists of 2 Plexiglass side pieces that are bonded to a base plate with water-resistant adhesive. The plate is attached to the base of the HM 162 Modular Flow Channel using bolts. The unit has 2 specially shaped protrusions so that the flow is constricted by the set-up on 3 sides. The flow acceleration resulting from the change in cross-section leads to a measurable drop in the water level using which the flow rate can be determined. The measuring device described here is also used in practice for determining flow rate in channels or rivers.
Learning Objectives / Experiments
· Flow rate measurement






For the determination of water levels, the use of the HM 162.54 Level Gauge on the moving HM 162.59 Instrument Carriage is recommended.
Features
Device for determining the flow rate in rivers and channels
Specification
[1] Flow rate measuring device for inserting in the HM 162 Modular Flow Channel
[2] lxwxh 1570x304x430mm
[3] Experimental set-up with base plate, 2 side pieces, a bracing component, retaining bolts and seals
[4] Side plates made of Plexiglass, hollow, water-resistant bonded
Dimensions and Weight
lxwxh : 1570 x 304 x 430 mm
Weight : approx. 27 kg
Scope of Delivery
1 measuring device, 1 set of accessories,
1 instruction manual
Order Details
070.16255 HM 162.55 Parshall Flume
© 2005 G.U.N.T. Gerätebau GmbH