Products  |  Fluid Mechanics and Hydrology  |  Hydrology and Hydraulic Engineering  |  HM 161  |  HM 161.45
HM 161.45 Culvert Fittings Show data sheet (pdf file)
Technical Description
The HM 161.45 Culvert Fittings consist of a PVC body that is equipped with 2 different pipe cross-sections: a semicircular and a rectangular shape. To make the channel body easy to handle on installation, the body is hollow. During the experiments, operation is possible with full flow through the cross-section (pipe flow) and partial flow through the cross-section.
Learning Objectives / Experiments
· Inlet losses in a pipe or bottom outlet
· Cross-section restrictions in open flumes
· Hydraulically good drain cross-sections
· Losses on outlet into air and under water
Features
Investigations on a culvert
Specification
[1] Unit for fitting to the HM 161 Large Flow Channel
[2] Channel body made of PVC;
lxwxh 2050x590x775mm
[3] Hollow channel body, with semicircular and rectangular cross-section
[4] Experiments on pipe flow or open flume flow
Technical Data
Semicircle: DN 315 (for full circle)
Rectangle wxh: 120x300mm
Dimensions and Weight
lxwxh : 2050 x 590 x 775 mm
Weight : approx. 30 kg
Scope of Delivery
1 set-up, 1 set of accessories, 1 instruction manual
Order Details
070.16145 HM 161.45 Culvert Fittings
© 2005 G.U.N.T. Gerätebau GmbH