Products  |  Fluid Mechanics and Hydrology  |  Hydrology and Hydraulic Engineering  |  HM 162  |  HM 162.34
HM 162.34 Ogee Weir with Manometer Board Show data sheet (pdf file)
Technical Description
The Ogee weir is one of the fixed overflow weirs. The weir body has 8 pressure measuring holes so that the pressure along the back of the weir can be measured. The pressure measuring holes are connected to a manometer panel on the side of the weir. The HM 162.54 Base Plate is required for fastening the weir in the channel. Tubular seals inserted in slots on the weir body complete the experimental set-up.
Learning Objectives / Experiments
Flow over an overflow weir
Measurements of the pressure along the back of the weir





For exact measurement of water levels, the use of the HM 162.52 Level Gauge on the moving HM 162.59 Instrument Carriage is recommended.
Features
Overflow weir with manometer board for displaying the pressure characteristic
Specification
[1] Fixed overflow weir for fitting to the HM 162 Modular Flow Channel
[2] Only for use with the HM 162.54
[3] Weir body made of PVC, lxwxh 400x304x300m
[4] Weir body connected to manometer board
[5] Measuring range of the manometer board 400mm water gauge, graduations 1mm
Technical Data
Manometer board
Measuring range: 400mmWG
Dimensions and Weight
l x w x h : 400 x 304 x 400 mm
Weight : approx. 8 kg
Scope of Delivery
1 weir, 1 set of accessories,
1 instruction manual
Order Details
070.16234 HM 162.34 Ogee Weir with Manometer Board
© 2005 G.U.N.T. Gerätebau GmbH