Products  |  Fluid Mechanics and Hydrology  |  Hydrology and Hydraulic Engineering  |  HM 162  |  HM 162.46
HM 162.46 Flow Splitters, Set of Three Models Show data sheet (pdf file)
Technical Description
Using the HM 162.46 accessory, it is possible to perform experiments on pillars in rivers in the HM 162 Modular Flow Channel. The unit contains 3 different, separable pillar types, 2 of each type of pillar fitted to the base plate represent the complete experimental set-up ready for installation in the flow channel. Pointed, rounded and flat flow splitters are provided; these can be combined as required. The experimental set-up is made of PVC and is attached to the base of the channel using bolts.
Learning Objectives / Experiments
· Influence of pillars on the flow behaviour in open flumes
· Flow behaviour at pillars
· Influence of pillar shape on the flow behaviour
· Measurement of the pillar damming effect
Features
Simulation of bridge pillars in a river
Specification
[1] Flow splitters for installing in the HM 162 Modular Flow Channel
[2] Experimental set-up made of PVC, lxwxh 330x160x315mm
[3] sets of flow splitters: pointed, rounded, flat,
lxwxh 100x30x300mm
Technical Data
Pointed flow splitter
Included angle: 41°
Rounded flow splitter
Radius: 15mm
Dimensions and Weight
lxwxh : 330 x 160 x 315 mm
Weight : approx. 5 kg
Scope of Delivery
1 experimental arrangement,
1 set of accessories, 1 instruction manual
Order Details
070.16246 HM 162.46 Flow Splitters, Set of Three Models
© 2005 G.U.N.T. Gerätebau GmbH