Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110  |  SE 110.15
SE 110.15 Experimental Set Bending Moment and Shear Force Show data sheet (pdf file)
Technical Description
The set supplements the SE 110/SE 111 universal test frames. Using the set it is possible to investigate the bending moment and shear force in a beam loaded with point forces. The values are measured using two dynamometers at a low-friction joint. The joint hash two degrees of freedom and is fitted at 1/3 of the span of the beam. To compensate for the deflection as result of the measurement travel, the gauges are equipped with adjustment bolts. Loading is performed using sets of weights that can be fitted at any position on the beam. Ball bearing mounted rollers form the bearings. All parts are securely attached to the test frame using special clamps.
Learning Objectives / Experiments
· Demonstration of the section principle in mechanics
· Calculation of section load on the beam
· Bending moment along the beam
· Shear force along the beam
Features
Direct measurement of bending moment and shear force
Low-friction joint with two degrees of freedom
Alternative products
SE 110.10 -- Experimental Set Shear Forces (Influence Lines)
SE 110.11 -- Experimental Set Bending Moment (Influence Lines)
WP 960 -- Shearing Force and Bending Moment Apparatus
WP 961 -- Shearing Force Apparatus
WP 962 -- Bending Moment Apparatus
Specification
[1] Supplementary experiment for the SE110/SE111 system, bending moment and shear force on loaded beams
[2] Beam span: 800mm
[3] Joint rigid to normal forces but not to moment and shear forces at 1/3 span
[4] Bending moment measurement: 0...14Nm
[5] Shear force measurement: ±50N
[6] Ball bearing mounted rollers as bearings
Technical Data
Total length of beam: 1000mm
Beam span: 800mm
Joint at 1/3 of the span (266mm)
Bending moment measurement: 0...14Nm
Shear force measurement: ±50N
Dimensions and Weight
Weight : approx. 22 kg
Scope of Delivery
1 experimental set, complete,
1 instruction manual
Order Details
022.11015 SE 110.15 Experimental Set Bending Moment and Shear Force
© 2005 G.U.N.T. Gerätebau GmbH