Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110  |  SE 110.20
SE 110.20 Experimental Set Portal Frame Show data sheet (pdf file)
Technical Description
The purpose of this set is the elastic deformation of loaded frames. The set is a supplement to the SE 110/SE 111 universal test frames. The test specimens are a U-shaped and and S-shaped frame made of steel with a square cross-section. These are subjected to varying loads using sets of weights and the resulting deformation measured. For this purpose, the set includes two precision position measurement gauges. The bearings can be either fixed or free enabling the frames to be evaluated as statically defined or undefined systems. The experimental set-up is quickly and securely assembled using special clamps.
Learning Objectives / Experiments
· Relationship between load and deformation
· Superposition principle of mechanics
· Usage of the theory of elasticity on statically defined and undefined systems, comparison of calculation and measured results.
· Method of virtual work
Features
Two different steel frames, U-shape and S-shape
Statically defined or undefined case can be investigated
Available accessories
SE 110.64 -- Software Program L4 Structural Mechanics
Alternative products
SE 110.55 -- Experimental Set Plastic Bending of Portals
SE 110.75 -- Experimental Set Portal Frame with Overhanging Ends
SE 110.76 -- Experimental Set Portal Frame with Internal Brackets
SE 110.77 -- Experimental Set Unsymmetrical Portal Frame
SE 110.78 -- Experimental Set Square Frame, Closed
SE 110.79 -- Experimental Set Square Frame, Open
Specification
[1] Supplementary experiment for the SE 110/SE 111 table-top system, portal frames
[2] Two frames made of steel, U-shape and S-shape
[3] Edge length 600mm, cross-section 10x20mm
[4] Bearing statically defined or undefined
[5] Precise deformation measurement using position measurement gauges 0...20mm, resolution 0.01mm
[6] Loading using sets of weights
Technical Data
Frame material: steel
Edge length: 600mm
Cross-section: 10x20mm
Position measurement range: 0...20mm, resolution 0.01mm
Dimensions and Weight
Weight : approx. 20 kg
Scope of Delivery
1 experimental set, complete,
1 instruction manual
Order Details
022.11020 SE 110.20 Experimental Set Portal Frame
© 2005 G.U.N.T. Gerätebau GmbH