Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110  |  SE 110.29
SE 110.29 Experimental Set Torsion of Rods & Tubes Show data sheet (pdf file)
Technical Description
This set is an additional accessory for the SE 110 / SE 111 range of experiments. Using this set, the basics of torsion loading can be investigated. The set contains several test rods made of brass with different shape cross-sections. A moment is applied to the rods using a cord around a pulley. The angle of twist at any point along the rod can be read with the aid of two sliding scales. Two chucks enable the test rods to be changed rapidly and easily. The robust construction of the set makes it suitable for student experiments. However, due to its size the unit is also suitable for demonstrations.
Learning Objectives / Experiments
· Twisting of rods with varying torsional stiffness
- Round rod of solid cross-section
- Round tube
- Round tube, with longitudinal slot
- Square tube
Features
Torsion rods made of brass with different cross-sections
Torsion angle can be determined at any rod position
Alternative products
EM 100 -- Educational Apparatus Bending and Torsion
WP 100 -- Apparatus for Testing Torsion and Deflection
Specification
[1] Supplementary experiment for the SE 110 / SE 111 table-top system, torsion of rods
[2] Four test rods made of brass, Round rod with solid cross-section, tube, slotted tube, square tube
[3] Effective radius of torsion disc: 110mm
[4] Loading with set of weights
[5] Angle scale ±90°, graduations 1°
Technical Data
Round rod, tube, slotted tube
Ø6mm, wall thickness: 1mm
Square tube: 6mm, wall thickness: 1mm
Disc: effective radius: 110mm
Angle scale: ±90°, graduations: 1°
Dimensions and Weight
Weight : approx. 15 kg
Scope of Delivery
1 experimental set, complete, 4 test bars,
1 instruction manual
Order Details
022.11029 SE 110.29 Experimental Set Torsion of Rods & Tubes
© 2005 G.U.N.T. Gerätebau GmbH