Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110  |  SE 110.49
SE 110.49 Experimental Set Deflection of Curved Bars Show data sheet (pdf file)
Technical Description
This experimental set is intended for use with the SE 110 or SE 111 universal testing frames. The set permits the deflection of slightly bent bars to be observed and compared. The set contains a circular, semi-circular and a quarter circle bar, these are loaded using a set of weights. Transverse and longitudinal deflection are measured using position gauges. The bars each have the same cross-section and thus the same planar moment of inertia, this facilitates comparisons. The deflection is calculated in the instruction manual using the principle of virtual displacement. Due to its dimensions, the experimental set can be used both as a student experiment and for demonstrations.
Learning Objectives / Experiments
· Deformation of slightly bent bars under load
- Circular bar
- Semi-circular bar
- Quarter circle bar
· Application of the principle of virtual displacement
Features
Investigation of the deflection of bent bars
Application of the principle of virtual displacement
Available accessories
SE 110.64 -- Software Program L4 Structural Mechanics
Alternative products
FL 170 -- Curved Bar Apparatus
Specification
[1] Supplementary set for the SE 110 table system, deformation of curved bars
[2] Investigation of deflection and the application of the principle of virtual displacement
[3] Bar material steel St37
[4] Circular, semi-circular and quarter circle bar
[5] Cross-section 20x5mm
[6] Pos. Meas. 0...20mm, graduations 0.01mm
Technical Data
Bar material: steel St37
Cross-section: 20x5mm
Bend radius: 200mm
Position measurement range: 0...20mm
Graduations: 0.01mm
Dimensions and Weight
Weight : approx. 10 kg
Scope of Delivery
1 experimental set, complete, 3 bars, 1 instruction manual
Order Details
022.11049 SE 110.49 Experimental Set Deflection of Curved Bars
© 2005 G.U.N.T. Gerätebau GmbH