Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Fluid Mechanics  |  HM 241  |  HM 241.01
HM 241.01 Electronic Level Gauge Show data sheet (pdf file)
Technical Description
The HM 241.01 Electronic Level Gauge is used to measure the water level in the HM 241 Computer Linked Hydraulics Bench and is connected to the HM 241 using a plug. It can be placed in any position on the sidewalls of the channel and locked with clamping bolts. A moveable probe is moved along a ruler until it touches the surface of the water. The position converted into a voltage signal is fed to the main unit where the value is processed and displayed. A pointer on the millimetre scale enables the measured value to also be read on the scale.
Learning Objectives / Experiments
· Measurement of water levels
Features
Accessory for measuring water levels
Measurements over the entire length of the channel possible
Specification
[1] Device for measuring the water levels in the HM 241 Computer Linked Hydraulics Bench
[2] Parts made of stainless steel and aluminium
[3] Scale 0..200mm, graduations 1mm
[4] Max. travel 205mm
[5] Elec. supply and measurement analysis via HM 241
[6] lxwxh 100x45x335mm, 1kg
Technical Data
Scale: 0..200mm
Graduations: 1mm
Travel: max. 205mm
Measuring rod diameter: Ø4mm
Dimensions and Weight
lxwxh : 250 x 225 x 150 mm
Weight : approx. 3 kg
Scope of Delivery
1 level gauge
1 instruction manual
Order Details
070.24101 HM 241.01 Electronic Level Gauge
© 2005 G.U.N.T. Gerätebau GmbH