Products  |  Fluid Mechanics and Hydrology  |  Turbomachine Demonstrators  |  HM 280  |  HM 280.01
HM 280.01 Interface Module Show data sheet (pdf file)
Technical Description
The HM 280.01 Interface Module provides the power supply for the sensors and feeds the analogue and digital sensor output signals to the data acquisition card in a PC. Fitted to the front panel of the unit are the On/Off switch and eight 5-pole sockets. These sockets are used to connect the sensors to the unit. A 50-pole socket on the rear of the unit is used for the transfer of data to a PC. The module is used for the fan, pump and turbine test stands in the HM 280-292 series.
Learning Objectives / Experiments
Facilitates the computer-based processing of measured data from units in the HM 280-292 series.
Features
Conditioning of measured data for a PC
Can be used for various units
Specification
[1] Unit for supplying power to sensors and feeding measured data to a data acquisition card, 230V,~50Hz
[2] Front plate/back panel of anodised aluminium, plastic housing, l x w x h 262x255x158mm, 3.6kg
[3] Power supply for sensors: +/-15V DC
[4] Analogue measured signals: 0..5V DC
[5] Digital measured signals: TTL
[6] 8 input ports
Technical Data
230V,~50Hz
Dimensions and Weight
l x w x h : 262 x 255 x 158 mm
Weight 3.6 kg
Scope of Delivery
1 interface module
Order Details
070.280.01 HM 280.01 Interface Module
© 2005 G.U.N.T. Gerätebau GmbH