Products  |  Fluid Mechanics and Hydrology  |  Turbomachines  |  HM 365  |  HM 365.32
HM 365.32 Turbine Supply Module Show data sheet (pdf file)
Technical Description

The HM 365.32 is part of an equipment series that facilitates the investigation of a wide range of engines and machines.

Different turbines can be operated and studied with this supply module.
The turbines are connected to the water circuit using a flexible hose. A powerful centrifugal pump supplies pressurised water to drive the turbine under test. All relevant measured values are acquired using sensors and are displayed on the measuring unit of the supply module. The data acquisition software enables the measured values to be further processed on a PC.
The HM 365 Universal Drive and Brake Unit is used as a generator to load the turbine.
A supply of three-phase mains electricity is required.

 
Learning Objectives / Experiments

Together with the HM 365.31 and HM 365 Universal Drive and Brake Unit, the following experiments are possible:
- Turbine characteristic curves
- Hydraulic power
- Mechanical power
- Turbine efficiency
- Influence of the blade adjustment on the Francis
  turbine characteristic curves

Features
* Modular series of units for the investigation of a
  range of engines and machines1 
* Base module for the operation of two different
  turbines1 
* Processing of the measured values on a PC
Available accessories
HM 365.31 -- Francis and Pelton Turbine Modules
Alternative products
HM 365.10 -- Water Pump Supply Module
HM 365.20 -- Oil Pump Supply Module
Specification

[1] Base module for the operation of turbines
[2] lxwxh 1500x1300x800mm, 120kg empty
[3] Copper pipe work with ball valve and electromagnetic flow meter
[4] Connection to the turbines via flexible hose with quick-release coupling
[5] Supply tank made of plastic
[6] Measuring amplifier for the connection of the electronic sensors
[7] Digital display of the measured values and relaying to PC data acquisition
 

Technical Data

Centrifugal pump
- 5 stages

- power consumption: 5.5kW
- max. flow rate: 400L/min

- max. head: 80m

Tank: capacity 96L

 

Measuring ranges
- pressure p1: -1...9bar
- pressure p2: 0...1.6bar
- temperature with PT100: 0...100°C
- flow rate: 0...600L/min
 

Dimensions and Weight
l x w x h : 1500 x 800 x 1300 mm
Weight empty : approx. 120 kg
Connections
400V, 50Hz, 3 phase or 230V, 60Hz, 3 phase
Cooling water min. 8L/min
Scope of Delivery

1 basic module with measuring amplifier

1 connecting hose

1 instruction manual

Order Details
070.36532  HM 365.32  Turbine Supply Module
© 2005 G.U.N.T. Gerätebau GmbH