Products  |  Fluid Mechanics and Hydrology  |  Turbomachine Demonstrators  |  HM 280  |  HM 280.02
HM 280.02 Power Meter, 0...600 W Show data sheet (pdf file)
Technical Description

The unit is installed between the consumer and the connection to power supply. The effective electrical power that is consumed is displayed digitally in watts. Because the output is determined by a real-time multiplication of current and voltage, the measured result is unrelated to the curve form and provides accurate measured results, even in the case of phase control. The measured value is shown as an analog voltage signal on a 5-pin output port in the front panel. The wattmeter can be connected to the interface module HM 280.01 via the output port.

 
Learning Objectives / Experiments

Determination of unit efficiency in the HM 280 - HM 292 series for the following units:

- HM 285 Piston Pump Demonstrator

- HM 286 Gear Pump Demonstrator

- HM 290 Turbine Demonstrator Supply Module 

 
Features
* Unit for displaying the electrical power consumption
  of a consumer
Specification

[1] Unit for measuring consumed electrical power
[2] Front plate/back wall of anodised aluminium, plastic housing, l x w x h 262x255x158mm
[3] Weight 2.4kg
[4] Power measurement unrelated to form factor

[5] Measuring range 0...600W
[6] 230V, 50/60Hz, 1 phase or 120V, 50/60Hz, 1 ph.
 
Technical Data

Measuring range: 0...600W

 
Dimensions and Weight
l x w x h: 262 x 255 x 115 mm
Weight: approx. 2 kg
Connections
230V, 50/60Hz, 1 phase or 120V, 50/60Hz, 1 ph.
Scope of Delivery
1 power unit
Order Details
070.28002  HM  280.02 Power Meter, 0...600 W
© 2005 G.U.N.T. Gerätebau GmbH