G.U.N.T. - Equipment for engineering education

Products | Fluid Mechanics and Hydrology | Turbomachines | HM 365 | HM 365.17

HM 365.17

Piston Pump Module

Technical Description

Reciprocating pumps are used, when a high delivery head is required. The pump is fitted to a base plate ready for installation. The base plate is simply slid into the HM 365.10 Basic Module Water Pumps and fixed in place. The unit is equipped with electronic sensors for recording intake and delivery pressure. The pump is connected to the experimental set-up using flexible hoses. To be able to interchange the pump easily and straightforwardly, the hoses are equipped with rapid action couplings. The motor necessary for drive is fitted to the HM 365 Universal Drive and Brake Unit.

Learning Objectives / Experiments

Together with the HM 365 Universal Drive and Brake Unit and the HM 365.10 Basic Module Water Pumps, the following experiments are possible:
· Recording of pump curves
· Determination of the power requirement of the pump
· Determination of the hydraulic power output of the pump
· Determination of the pump efficiency
· Determination of the system characteristic and operating point of the pump

Features

Investigation of the pump characteristic of a reciprocating pump

Available accessories

HM 365 -- Universal Drive and Brake Unit
HM 365.10 -- Water Pump Supply Module

Specification

[1] Reciprocating pump for operation on the HM 365.10 Basic Module Water Pumps
[2] Pump complete with connections and sensors fitted to base plate
[3] Max. capacity 1.5mł/h
[4] Max. head 60m WC
[5] max. motor speed 3000rpm

Technical Data

Maximum capacity: 1.5mł/h
Maximum head: 60m WC
max. motor speed: 3000rpm
Intake connection diameter 1”
Delivery connection diameter 1”

Dimensions and Weight

lxwxh : 690 x 500 x 410 mm
Weight : approx. 24 kg

Scope of Delivery

1 reciprocating pump, fitted to base plate complete with connections and sensors

Order Details

o070.36517 HM 365.17 Piston Pump Module