Products  |  Fluid Mechanics and Hydrology  |  Turbomachines  |  HM 365  |  HM 365.45
HM 365.45 Axial-Flow Pump Module Show data sheet (pdf file)
Technical Description
Axial propeller pumps are used when large flow rates at small heads are required.
The HM 365.45 module is part of a series of units for the investigation of engines and machines. By means of the usage of electronic sensors in the entire series, it is possible to use PC data acquisition. The HM 365.45 is equipped with such data acquisition. In addition, it includes a supply tank, sensors for the recording of all relevant measured data and its display on a measuring amplifier. The motor necessary for drive is fitted to the HM 365 Universal Drive and Brake Unit.
Learning Objectives / Experiments
The following experiments are possible in conjunction with the HM 365:
· Determination of the pressure-volume characteristic curve
· Power required by the pump
· Determination of the hydraulic power
· Determination of the efficiency
· Determination of the head
· Determination of the system characteristic curve
Features
Investigation of the characteristics of an axial propeller pump
PC data acquisition
Specification
[1] Module for the investigation of an axial propeller pump
[2] lxwxh 1100x850x1385mm, approx. 120kg
[3] Pipe work made of plastic
[4] Magnetic-inductive flow meter
[5] Stainless steel tank with sight glass
[6] 230V,~50Hz
Technical Data
Pump 1kW at 1000rpm:
Max. capacity: 700ltr/min
Max. head: 1.75m
Measuring range of the measuring amplifier:
Flow rate: 0...833ltr/min
Temperature: 0...100°C
Intake pressure p1: –1...1bar
Delivery pressure p2: 0...0.6bar
Tank: 160ltr
Dimensions and Weight
lxwxh : 1100 x 850 x 1385 mm
Weight : approx. 120 kg
Connections
230V, ~50Hz
Scope of Delivery
1 experimental module, complete, 1 instruction manual
Order Details
070.36545 HM 365.45 Axial-Flow Pump Module
© 2005 G.U.N.T. Gerätebau GmbH