Products  |  Fluid Mechanics and Hydrology  |  Fundamentals of Fluid Mechanics  |  HM 150  |  HM 150.07
HM 150.07 Bernoulli´s Principle Demonstrator Show data sheet (pdf file)
Technical Description
The entire experimental set-up is clearly laid out on a metal panel, this is fitted to the HM 150 Basic Hydraulics Bench. The bench provides the water supply for carrying out the experiment. The experimental set-up comprises a measurement section with a transparent venturi tube, the associated pipework and 2 pressure measuring devices. Six measurement connections on the venturi tube enable the static pressure along the pipe through which the water is flowing to be indicated on a multiple tube manometer. The total pressure is measured with a pitot probe and displayed on a second tube manometer. The flow rate is determined using the volumetric tank on the bench.
Learning Objectives / Experiments
· Demonstration of Bernoulli's law
· Display of the pressure characteristic using the venturi tube
· Determination of the flow rate factor
Features
Experimental set-up for investigating and verifying Bernoulli's law
Alternative products
HM 150.13 -- Methods of Flow Measurement
HM 150.32 -- Pressure Distribution in a Venturi Nozzle
Specification
[1] Experimental set-up for demonstrating Bernoulli's law, for use with the HM 150 Basic Hydraulics Bench
[2] l x w x h 1100x640x900, 40kg
[3] Venturi tube made of transparent plastic, divided into 6 segments, each segment with measuring connection
[4] 2 tube manometers
Technical Data
6 tube manometer
Measuring range: 300mmWC
Tube manometer
Measuring range: 530mmWC
Dimensions and Weight
l x w x h : 1100 x 640 x 900 mm
Weight : 40 kg
Scope of Delivery
1 experimental set-up, fully assembled,
1 instruction manual
Order Details
070.15007 HM 150.07 Bernoulli's Principle Demonstrator
© 2005 G.U.N.T. Gerätebau GmbH