Products  |  Fluid Mechanics and Hydrology  |  Turbomachines  |  HM 365  |  HM 365.13
HM 365.13 Multistage Centrifugal Pump Module Show data sheet (pdf file)
Technical Description
Multiple stage centrifugal pumps are used if a particularly high head is to be overcome. The pump is fitted to a base plate ready for installation. This can be easily and straightforwardly slide into the mounting on the HM 365.10 Basic Module, Water Pumps and fixed in place. The unit is equipped with electronic sensors for recording intake and delivery pressure. After filling with water, the pump is connected to the experimental set-up using flexible hoses. To be able to interchange the pump easily and straightforwardly, the hoses are equipped with rapid action couplings. The motor necessary for drive is fitted to the HM 365 Universal Drive and Brake Unit.
Learning Objectives / Experiments
Together with the HM 365 Universal Drive and Brake Unit and the HM 365.10 Basic Module Water Pumps, the following experiments are possible:
· Recording of pump curves
· Determination of the power requirement of the pump
· Determination of the hydraulic power output of the pump
· Determination of the pump efficiency
· Determination of the system characteristic and operating point of the pump
· Checking of the necessary NPSH value for the pump
Features
Investigation of the pump characteristic of a multiple stage centrifugal pump
Available accessories
HM 365 -- Universal Drive and Brake Unit
HM 365.10 -- Water Pump Supply Module
Specification
[1] Centrifugal pumps with 3 stages for operation on the HM 365.10 Basic Module Water Pumps
[2] Pump complete with connections and sensors fitted to base plate
[3] Max. capacity 17m³/h
[4] Max. head 25m WC
[5] Nominal speed 2900rpm
Technical Data
Maximum capacity: 17m³/h
Maximum head: approx. 25m WC
Nominal speed: 2900rpm
Intake connection diameter DN 50
Delivery connection diameter DN 32
Dimensions and Weight
l x w x h: 630 x 300 x 400 mm
Weight : approx. 28 kg
Scope of Delivery
1 centrifugal pump, fitted to base plate complete with connections and sensors
Order Details
070.36513 HM 365.13 Multistage Centrifugal Pump Module
© 2005 G.U.N.T. Gerätebau GmbH