Products  |  Process Control and Process Engineering  |  Chemical Process Engineering  |  CE 310  |  CE 310.02
CE 310.02 Tubular Reactor Show data sheet (pdf file)
Technical Description
The tubular reactor is used as an accessory to the CE 310 Chemical Reactors Trainer to be able to study its behaviour in respect of the reaction kinetics. The two liquid chemicals are pumped continuously through a plastic hose wound into a coil to form the reaction tube where the chemicals react. The spiral tube is placed inside a cylinder made of borosilicate glass that can be connected to the heating circuit on the basic unit. All hose connections are self-sealing.
Learning Objectives / Experiments
· Continuous chemical reaction, observation of the conversion of the reactants
- At different reactant flow rates
- At different reaction temperatures
Features
Hose spiral as reaction tube in a water bath for continuous operation
Specification
[1] Tubular reactor as accessory for CE 310 Chemical Reactors Trainer
[2] Reaction tube formed by plastic hose, made of PA, wound into a spiral tube
[3] Hose length 20m, id 5.5mm, reactor volume 0.475ltr
[4] Tank cylinder made of borosilicate glass
[5] Hose connections for chemicals and hot water made using rapid action hose couplings
Technical Data
Hose material: PA
Length of reaction section: 20m
Hose inside diameter: 5.5mm
Resulting reactor volume: approx. 0.475ltr
Dimensions and Weight
l x w x h : 470 x 250 x 600 mm
Weight : approx. 25 kg
Scope of Delivery
1 tubular reactor, complete
Order Details
083.31002 CE 310.02 Tubular Reactor
© 2005 G.U.N.T. Gerätebau GmbH