Products  |  Process Control and Process Engineering  |  Basic Control Systems  |  RT 200  |  RT 200.01
RT 200.01 Two-Channel Chart Recorder Show data sheet (pdf file)
Technical Description
This recorder module is an electronic chart recorder equipped with two indirect acting measuring systems for standard current signals. The signals are plotted using easy to change pens with built-in ink tank. A chart cassette with 22m of chart paper ensures that unit can be used for long periods without the need to replace the paper. The feed can be easily adjusted in 15 steps to suit specific requirements. The recorder is built into a benchtop housing. The recorder is connected to the relevant module using laboratory cables.
Learning Objectives / Experiments
· for usage on all experimental units with current output signals
· especially the RT 200
Features
Electronic two-channel chart recorder
Two pen colours, 15 selectable feed steps
Specification
[1] Two-channel electronic chart recorder
[2] Input signal 4...20mA
[3] Scales 0...100% linear
[4] Chart width 100mm
[5] Length of chart visible 80mm
[6] Total length of paper 22m
[7] Feed 5...7200mm/h, 15 steps
[8] 230V, ~50Hz
Technical Data
Input signal: 4...20mA
Scales: 0...100% linear
Chart width: 100mm
Feed: 5...7200mm/h in 15 steps
230V, ~50Hz
Dimensions and Weight
l x w x h : 235 x 361 x 228 mm
Weight : approx. 8 kg
Scope of Delivery
1 recorder module,
1 instruction manual
Order Details
080.20001 RT 200.01 Two-Channel Chart Recorder
© 2005 G.U.N.T. Gerätebau GmbH