The RT 450.03 controlled system module is a panel-mounted ready-to-install element. In conjunction with other modular control components, it enables pressure control systems with different characteristic features to be constructed and investigated.
The assembly panel is mounted on the carrier frame of the base system RT 450. RT 450.03 consists of two steel pressure vessels and is operated with compressed air as the working medium. Each vessel is fitted with a pressure indicator and a pressure relief valve. One vessel also has a drain valve. Both vessels can be fitted with a pressure transducer. The vessels are interconnected by a vent valve and can therefore be connected in series. This makes it possible to represent both first and second order pressure control systems.
The RT 450 base module supplies the controlled system module with its working compressed air. Pneumatic hoses with quick-release couplings connect all the modules to a pressure control loop.
Extensive technical documentation is provided for the complete RT 450 system. The instructional documents detail the technological fundamentals and provides a step-by-step guide through the set tasks and exercises.

- Planning, setting up, testing, optimising and

  assessing pressure control loops with different

  objectives and components:
  + constructing a 1^st order pressure control system
  + constructing a 2^nd order pressure control system
- Familiarisation with the design and function of

  different instrumentation and control components
- Familiarisation with technical terminology and

  symbols in industrial process control
- Practical exercises: Implementing process and

  signal lines
- Commissioning and troubleshooting of process

  control systems