Products  |  Theory of Machines and Properties of Materials  |  Structural Mechanics  |  SE 110  |  SE 110.75
SE 110.75 Experimental Set Portal Frame with Overhanging Ends Show data sheet (pdf file)
Technical Description
The subject of experiments using this experimental set is the elastic deformation of a loaded portal frame. It is a supplement to the SE 110 / SE 111 universal test frame. The experimental object is a welded frame made of rectangular metal section. The ends of the top bar of the portal overhang, its base is open. The portal can be loaded vertically or horizontally as required using sets of weights and 3 moving hooks. The resulting deformation is measured with a dial gauge. The bearings can be either fixed or free enabling the portal to be observed as statically defined or undefined system. The experimental set-up is quickly and securely assembled using special clamps. The optional available software SE 110.66 supports learning success.
Learning Objectives / Experiments
- Relationship between load and deformation
- Superposition principle of mechanics
- Application of the theory of elasticity to statically defined and undefined
  systems, comparison of calculation and measured results
- Method of virtual work
Features
* Steel portal frame with jibs
* Statically defined or undefined case can be
  investigated
Available accessories
SE 110.66 -- Software Program L6 Structural Mechanics
Alternative products
SE 110.20 -- Experimental Set Portal Frame
SE 110.76 -- Experimental Set Portal Frame with Internal Brackets
SE 110.77 -- Experimental Set Unsymmetrical Portal Frame
SE 110.78 -- Experimental Set Square Frame, Closed
SE 110.79 -- Experimental Set Square Frame, Open
Specification
[1] Supplementary experiment for SE 110 / SE 111 system, deformation of portals
[2] Rectangular steel portal frame, overhanging ends with hooks, open base
[3] Bearings statically defined or undefined
[4] Deformation measured by dial gauge
[5] Load applied using 3 weights sets and moving hooks
Technical Data
Portal frame material: Steel
Edge length: 600mm, cross-section 10x20mm
Dial gauge measuring range: 0...20mm, resolution 0.01mm
Weights set: 3x1N basic weight, 9x5N, 12x1N
Dimensions and Weight
Weight : approx. 17 kg
Scope of Delivery
1 complete experimental set, 3 weight sets, 1 dial gauge, 1 instruction manual
Order Details
022.11075  SE 110.75  Experimental Set Portal 
                     Frame with Overhanging Ends
© 2005 G.U.N.T. Gerätebau GmbH